Silestone > For the Trade > CSI Specifications

3 Part CSI Specifications

This guide specification has been prepared by Cosentino USA to assist design professionals in the preparation of a specification section covering Silestone quartz countertops. Refer to Silestone literature for additional information.

Cosentino recommends the use of setting materials by Laticrete International. These products are included in this section as the preferred method, with non-proprietary materials included as an option.

This specification may be used as the basis for developing either a project specification or an office master specification. Since it has been prepared according to the principles established in the Manual of Practice published by The Construction Specifications Institute (CSI), it may be used in conjunction with most commercially available master specifications systems with minor editing.

Part 1 - GENERAL

SECTION 066119
QUARTZ SURFACING FABRICATIONS 

SECTION 096346
QUARTZ FLOORING - THIN SET 

SECTION 096347
QUARTZ FLOORING - THICK SET 

SECTION 097503
QUARTZ WALL FINISHES - THIN SET 

SECTION 097504
QUARTZ WALL FINISHES - THICK SET 

SECTION 123661.19
QUARTZ COUNTERTOPS